TvONE Customer Support PLEASE NOTE: As from 18th December 2017, please email: (for USA support) or (for EMEA support) and do not use this website to submit new queries for those areas. Edge Blending Software Tool Edge Blending Tool software download Version 1.0.14 Release: Fixed the issue in resolution reading Revision History Version 1.0.12 Initial Release This tool allows simple configuration of multiple units when building an edge blending system. Simply connect the units in the system to a computer Via RS232 or Ethernet and follow the instructions on screen, the application will take you through the edge blending procedure step by step. As with all edge blending setups it is important that the suitable projectors are used and they are correctly mounted on a stable platform. ID 231 Category Software Downloads Date Created 15:54:15 Date Updated 09:29:25 Was this information helpful?

Edge Blending is only available on Resolume Arena! Edge blending is the dark art of stitching together the output of two or more overlapping projectors and making one seamless screen out of them. Resolume will help you do this by gradually fading out the area where the projectors overlap. Serial Bootloader Avr. In order for edge blending to take effect, you need to have your slices partially cover the same area of your composition. This overlap should mimic the physical overlap of the projectors on your surface. In other words, you need to make sure that the slices overlap the same way as your physical projectors do in the real physical world. For best results, a minimum of 15% overlap is recommended.

You can use the test card ( Output >Show Test Card ) for this. Display your test card on the projector and keep moving the slices towards each other until the image on the projectors shows the same pixels in the overlapping area. The test card has numerical values on it to help you find the correct spot on the grid. On the output side, you need to make sure your projectors are aligned properly. The best way to do this is to perspective warp each output while projecting the testcard again. Traktor Dj 2 5 3 Cracker.

Then keep adjusting the corner points one by one until the grid aligns perfectly. Perspective warping are the four big corner points of your slice. Make sure you use those and not their smaller baby brothers that only do linear warping.

Then you can turn on edge blending for each slice in turn. Resolume will automatically blend the edge in the middle. Since projectors project light, they can never project true black (black actually is the absence of light). Rather they project a very deep grey. So where two projectors overlap, this causes the problem to double up. In the areas that should be 'blacked out' by softedging, they will project deep grey on deep grey.

Blend & Warp use precision geometry correction and edge blending to enable flawless visuals on multi projector displays. Ideal for flat and curved screens.

The result in the overlapping area will be an even lighter grey. The black level compensation is to make up for this difference, by allowing you to make the non-overlapping areas slightly brighter.

Black Level Compensation is available on the output tab.